The JYINS Active Harmonic Filter (AHF) Cabinet is an advanced power quality solution designed for 200V–800V industrial three-phase systems. Using DSP-controlled IGBT technology, it actively monitors and cancels harmonic currents from the 2nd to 51st order in real-time. The modular cabinet design supports wall-mounted or floor-standing installation and is ideal for data centers, manufacturing plants, HVAC systems, and renewable energy facilities seeking compliance with IEEE 519 and IEC 61000 standards.
Parameter |
Specification |
Model Series |
JYAHF Series |
Rated Voltage |
200V–800V AC (3-Phase 3-Wire / 4-Wire) |
Frequency |
50/60 Hz ± 5% |
Harmonic Compensation |
2nd–51st Order (Selective or Full) |
Filtering Capacity |
50A / 100A / 150A / 200A / 300A per Module |
Response Time |
< 1ms (Instantaneous) |
Total Response |
< 10ms (Full Load) |
Topology |
3-Level IGBT PWM |
Harmonic Mitigation Rate |
> 97% (Individual Harmonics) |
THDi Reduction |
< 5% After Filtering |
Parallel Capability |
Up to 10 Modules |
Communication |
RS485 / Modbus RTU / TCP-IP |
Enclosure Rating |
IP20 / IP31 (Indoor) |
Cooling |
Forced Air with Intelligent Speed Control |
Zhejiang Jingying (JYINS) Electrical Co., Ltd., established in 1993, is a leading manufacturer with over 30 years of expertise in power inverters, solar charge controllers, energy storage systems, and renewable energy solutions. Our 500+ employee factory in Wenzhou, China, serves clients across 50+ countries with ISO9001/CE/SAA/RoHS certified products.
Q: What harmonics does the AHF filter?
A: The JYAHF can selectively filter any harmonic from the 2nd to 51st order, including zero-sequence (3rd, 9th, 15th) harmonics that cause neutral conductor overheating.
Q: How is AHF different from passive filters?
A: Passive filters are fixed-tuned and can cause resonance. AHF actively adapts to changing loads in real-time, handles multiple harmonics simultaneously, and cannot create resonance.
Q: Can I install it in an existing switchgear?
A: Yes, the modular cabinet design can be wall-mounted, floor-standing, or integrated into existing switchgear with proper space allocation.
Q: What is the typical ROI?
A: Most industrial users see payback within 12-18 months through reduced energy losses, avoided penalty charges, and extended equipment lifespan.