The JYINS 12V 15A Car Battery Charger features a premium aluminum alloy housing with advanced microprocessor-controlled 7-stage charging technology. Designed for professional and enthusiast use, it delivers 15A fast charging for 12V lead-acid, AGM, gel, EFB, and LiFePO4 batteries from 20Ah to 300Ah. The large backlit LCD display shows real-time voltage, current, charging stage, and battery health status. Built-in repair/desulfation mode can recover deeply discharged and sulfated batteries, extending their service life.
Parameter |
Specification |
Model |
JYC-1215AL |
Input Voltage |
110V-240V AC, 50/60Hz |
Output Voltage |
12V DC (Nominal) |
Charging Current |
15A Maximum |
Charging Stages |
7-Stage: Desulfation, Soft Start, Bulk, Absorption, Analysis, Float, Pulse |
Battery Types |
Lead-Acid, AGM, Gel, EFB, LiFePO4 |
Battery Capacity Range |
20Ah - 300Ah |
Display |
Backlit LCD (V, A, Stage, Battery Health %) |
Housing Material |
Aluminum Alloy (Corrosion-Resistant, Enhanced Cooling) |
Protection |
Reverse Polarity, Short Circuit, Overheat, Overcharge, Spark-Proof |
Cooling |
Passive Aluminum Heatsink + Silent Fan (Activated Above 40℃) |
IP Rating |
IP65 (Dust-tight, Water-Resistant) |
Operating Temperature |
-20℃ to 45℃ |
Weight |
~1.2 kg |
Zhejiang Jingying (JYINS) Electrical Co., Ltd., established in 1993, is a leading manufacturer with over 30 years of expertise in power inverters, solar charge controllers, energy storage systems, and renewable energy solutions. Our 500+ employee factory in Wenzhou, China, serves clients across 50+ countries with ISO9001/CE/SAA/RoHS certified products.
Q: What is the repair/desulfation mode?
A: This mode sends high-frequency pulses to break down lead sulfate crystals that form on battery plates over time. It can restore up to 70% of sulfated batteries that would otherwise need replacement.
Q: Can I charge a completely dead battery (0V)?
A: Yes, the soft-start stage can detect and safely begin charging deeply discharged batteries as low as 2V. Batteries below 2V may need manual jump-start before charging.
Q: Is it safe to leave connected indefinitely?
A: Yes, after full charge the charger automatically switches to float/pulse maintenance mode, keeping the battery at optimal voltage without overcharging.
Q: Does the aluminum body get hot?
A: The aluminum housing acts as a passive heatsink and remains warm but not dangerously hot during operation. The internal fan activates only in high-temperature conditions.