The JYINS 100W IP65 Folding Solar Panel is a rugged portable solar charger designed for outdoor enthusiasts, campers, and RV travelers. Featuring high-efficiency monocrystalline cells encased in durable Oxford fabric with an IP65 waterproof rating, it delivers reliable 100W charging for portable power stations, 12V batteries, and USB devices. The foldable design (540 x 570 x 15mm folded) with integrated carry handle and built-in charge controller makes it the ultimate grab-and-go solar solution for off-grid adventures.
Parameter |
Specification |
Model |
LS-F100M |
Maximum Power (Pmax) |
100W (2 x 50W panels) |
Maximum Power Voltage (Vmp) |
18.4V |
Maximum Power Current (Imp) |
5.44A |
Open Circuit Voltage (Voc) |
22.8V |
Short Circuit Current (Isc) |
5.81A |
Cell Type |
Monocrystalline Silicon |
Protection Class |
IP65 (Dust-tight, Water-Resistant) |
Folded Dimensions |
540 x 570 x 15 mm |
Open Dimensions |
1100 x 540 x 5 mm |
Weight |
3.7 kg |
Max System Voltage |
60V DC |
Output |
DC 18V + Built-in 5V USB Ports |
Temperature Range |
-20℃ to 85℃ |
Warranty |
5 Years |
Zhejiang Jingying (JYINS) Electrical Co., Ltd., established in 1993, is a leading manufacturer with over 30 years of expertise in power inverters, solar charge controllers, energy storage systems, and renewable energy solutions. Our 500+ employee factory in Wenzhou, China, serves clients across 50+ countries with ISO9001/CE/SAA/RoHS certified products.
Q: How do I connect this to my portable power station?
A: Use the included DC output cable with standard connectors. Most power stations accept 18V solar input directly. Check your power station's solar input specifications.
Q: Can I leave it out in the rain?
A: Yes, IP65 rated means it's protected against low-pressure water jets and dust. However, avoid submerging in water and ensure connectors are not in standing water.
Q: How long to charge a 500Wh power station?
A: With ideal sunlight (1000W/m2), approximately 5-6 hours. In real-world conditions, plan for 6-8 hours of good sun for a full charge.
Q: Can I connect two panels together?
A: Yes, connect in parallel (positive to positive, negative to negative) for 200W total. Ensure your power station or charge controller can handle the combined current.