Active Harmonic Filter Grey Black for 400V , China Active Harmonic Filter Grey Black for 400V Manufacturers, Suppliers, Factory

Product Description

Certification	RoHS, ISO, CE
Colour	Grey Black
Service	ODM / OEM
Voltage	400V
Operating Frequency	50Hz ±5%
Circuit Topology	3p4w 3p3w
Transport Package	Export-Grade Wooden Case
Specification	450X486X160
Trademark	jyins
Origin	China
HS Code	8543709990
Production Capacity	5000 Sets/ Month

Product Description

Active Harmonic Filter

This device has various compensation modes (harmonic, reactive power, three-phase unbalance and capacitor switching control), which can simultaneously make the said various compensation, and compensation capacity for harmonic, reactive power, and three-phase unbalance can also be set freely, comprehensively solving the problem of power quality of the low-voltage power distribution side

Specification

Optimal Power Quality Control

• Continuous power factor correction
• Capacitive & inductive reactive power compensation
• Accurate PF maintenance -1.0 ≤ CosΦ ≤ 1.0
• Three-phase load unbalance less than 5%
• Reduction of neutral current

Leading Edge Technology

• Three-level topology
• Ultra-compact modular design1
• Fastest switching frequency 25.6kHz

• Lowest Power Consumption < 2%
• LeadingThermal Dissipation Technology

Harmonic Filter

• Adaptive Algorithm (ADALINE)
• THDi less than 5% at rated loads
• Up to 98% filtration efficiency
• Full response time less than 5ms
• On-demand or fully compensated

Technical Parameter
Rated Voltage	220V (155-259V)	400V (296-465V)	480V (346-516V)	690V (500-825V)
Rated Capacity	15/25/50/75/100/150A	15/25/30/50/75/100/125/150A/200A	50/75/100/120/150A	50/100/125/150A
Phase System	3P3W/3P4W
Main Frequency	50/60Hz ± 5%
Circuit Topology	Three-level
Multiple Compensation Modes	Harmonic, reactive power, three-phase load imbalance compensation
Filter Range	2 to 50 odd harmonics (by order or full compensation)
Harmonic Filtering Rate	≥98%
Filtering Performance	Typically, THDi ≤ 5% at rated loads
Three-Phase Load Balancing Effect	≤ 5% to mitigate negative and zero sequence currents
Neutral Linear Filtering Capability	3 times the rated filter current (in case of 4-wire equipment)
Initial Response Time	≤50us
Output Current Limit	Automatic output limitation within 100% of rated capacity
Control Algorithm	Intelligent FFT, ADALINE, Fast Fourierand Instantaneous Reactive Power Algorithms
Controller	DSP+FPGA
Protection	Hardware protection, software protection
Control Connections	Electrical Connections
Human Machine Interface	4.3" / 7" / 10" Touch TFT LCD HMI
Noise	<60db (<45db at low speed operation)
Installation Method	Module embedded (rack), wall-mounted, floor-mounted
Protection Level	IP30 maximum
Cooling Method	Speed controlled intelligent air-cooled PWM fan
Colour	RAL 7035 Industrial Grey/Black
Ambient Temperature	-20~55℃
Relative Humidity	95% max, no condensation
Installation Height	Rated capacity at altitude ≤2000m, appropriate load shedding at altitude >2000m
Qualification	CE, IEEE61000, Type test report, ISO9001:2015
Conformity Standard	IEEE 519, ERG5/4
Communication Protocol	Adopts Modbus RTU remote communication protocol and TCP/IP protocol; Two channel RS485 and CAN bus, support mobile APP operation, support Ethernet